Lenticular Filter or Depth Stack Cartridge & Capsules for 3M Zeta Plus C Series Replacement or Filtrox replacement
Depth filtration media designed to retain contaminants by mechanical entrapment and electrokinetic adsorption
This multi-layered depth structure captures particles of various sizes across the entire media depth instead of only on the surface, ensuring thorough and stable filtration efficiency. High contaminant holding capacity for economical filtration and reliable particle removal, effectively extending service life and reducing frequent filter replacement in continuous industrial fluid treatment.

FDA material compliance
All filter raw materials fully meet strict FDA food contact safety standards, suitable for food, beverage, pharmaceutical and biopharmaceutical processing. Eases validation and regulatory submissions by providing vital documentation and traceability, supporting smooth compliance with global industrial hygiene and quality supervision requirements.

Self-contained, single-use disposable capsule and cartridge modules
These integrated, ready-to-use units need no complex assembly or pre-operation preparation, simplifying on-site operation steps. Reduced labor time for changeouts and elimination of cleaning validation, greatly cutting operational costs and avoiding cross-contamination risks in sensitive fluid processing.

Applications
Pharmaceuticals: Antibiotics, Cough Syrups, Intravenous Solutions, Growth Media, & Bio process Fluid
Beverages: Wine, Beer, Juices, Soft Drinks, & Cider
Distilled Spirits: Liquor, Cognac, Cordials
Food Products: Syrups, Brines, Broths, Vinegar, Edible Oils, & Sugars
Cosmetics: Perfumes, Lotions, Shampoos, Oils, Deodorants, & Colognes
Specifications
| Outside Diameter | 8'', 12'', 16'' |
| Filter sheet material | Cellulose fibers, Resins, Perlite, Natural diatomaceous earths, and Etc., |
| Core and Separator | Polypropylene (PP) |
| O-ring or Gasket | Silicone, EPDM, Viton |
| Typical Rating | H001= 0.04-0.2mµ
H002= 0.2-0.4µm H004= 0.4-0.6µm H100= 1-3µm H150= 2-5µm H200= 3-7µm H250= 10-15µm H400= 25-30µm H500= 40-50µm H600= 50-60µm |
Notes
1. Make sure max storage time not exceed 36 months before installation.
2. Sterilization way: Using 80℃ hot purewater sterilization 30 minutes at least and max operation differential pressure is 1bar.
3. When max differential pressure got 2.5bar(23℃)need to change filter.
4. Suggest max operation temperature 60℃ which keeps working well.
Max temperature 80-90℃ for a while when steam.
Max pressure should be 1kgs for backwashing.



